|
MX-1408 extractor is compact and easy to operate. There are no external solution lines, hoses, or separate wand to deal with, they are self-contained. It is excellent for cleaning carpeted areas in hotels, offices, stores, restaurants, and many other facilities. Brush assisted forward/reverse action allows for the extractor to clean carpet fibers in "both" directions for more effective cleaning while reducing labor time and effort.
- Trigger Lever
Squeeze the trigger to operate in reverse.
- Control Switch
Located at operator finger tips, clearly illustrated and sealed to protect against moisture.
- 2 Sets of 2 Spray Nozzles
Operates independently, spraying ahead of the brush when cleaning in either direction. Solution volume can be adjusted using a directional valve.
- See-Thru Dome
Allows for constant monitoring of the extractors cleaning effectiveness.
- Tank Drains Fully
Drains into a floor drain or the supplied plastic bucket.
|
- Kick Stand
Lifts brush off the floor to protect it when not in use.
- Shared Solution/Recovery SystemHolds solution in a bladder and it is pumped out during the cleaning operation. As the bladder empties, dirty solution is vacuumed up and recovered in the commonly shared tank.
- Vacuum Shoes
Provide continuous forward and reverse suction recovering dirty solution in either direction.
- 25 FT Power Cord
Wraps around the quick release cord holder on back of handle for storage.
|
| Order No. |
338583 |
| Cleaning Path |
14" w/2 Forward & 2 Reverse |
| Vacuum Motor |
120V, 1.9 HP, 112 CFM |
| Waterlift |
106" |
| Brush Motor |
0.5 HP, 2.3 AMPS |
| Brush Speed |
675 RPM |
| Water Output |
1.8 GPM (Adjustable) |
| Pump Pressure |
100 PSI |
| Power Cord |
25 Ft, 3 Wire Grounded |
| Literature |
 |
| Manual |
|
| Parts List |
|
|
